Wall Furnace Maintenance Checklist: What to Clean, Test and Check This Winter

A wall furnace needs three things from you each heating season: clear space around it, a clean grille, and a yearly inspection by a licensed technician. Homeowners can handle the clearing and the surface cleaning, while burner cleaning, gas parts, and venting checks belong to a professional. Downey Plumbing Heating & Air Conditioning holds CA License #731172, which you can verify with the Contractors State License Board. We hold a BBB A+ rating and a 4.8-star record across 850+ Yelp reviews, and our team has served Southern California since 1930.

Wall Furnace Maintenance Checklist What to Clean, Test and Check This Winter

This checklist shows what to clean, test, and check on a gas wall furnace, which steps are safe to do yourself, and which steps need a technician. It draws on a manufacturer manual, SoCalGas, CAL FIRE, and California law, and it covers floor furnaces briefly because they share most of the same needs.

  • Every month of the heating season: keep three feet clear, vacuum the grille with the furnace off, and look at the flame when your model shows it.
  • Before the first cold nights: test your carbon monoxide alarms, check the outside vent terminal from the ground, and run one full cycle while you stay home.
  • Once a year: book a licensed technician to clean the burner and pilot assembly, test the gas valve and thermocouple or thermopile, and inspect the vent and clearances.
  • Call for service: a yellow burner flame, soot around the grille, a pilot that keeps going out, or a smell that does not fade. For a rotten egg smell, leave the home and call SoCalGas from outside.

Book a Wall Furnace Maintenance Visit Before the Cold Settles In

Our licensed technicians clean, test, and inspect gas wall furnaces and floor furnaces across Downey and nearby cities. Call 562-646-1221 to schedule heating maintenance in Downey, or request service online.

What Is Wall Furnace Maintenance, and Why Does It Matter?

A wall furnace is a self-contained gas heater that mounts in or on a wall and heats the room or rooms beside it without ducts. Many models burn natural gas behind a front grille, and many older models keep a small pilot flame lit and send their exhaust through a vent pipe to the roof or an outside wall.

Maintenance covers three jobs. It cleans the parts that collect lint, it tests the parts that control the flame, and it inspects the path that carries exhaust outdoors. Empire’s owner manual for a gravity wall furnace tells owners to have a qualified service person inspect the appliance before use and at least once a year. SoCalGas advises gas appliance owners to have appliances checked every year, and it states that natural gas appliance maintenance always belongs to the homeowner. Check the manual for your own model, because intervals and clearances differ by brand.

A wall furnace sits inside your living space, with a small burner close to floors, rugs, and curtains. Lint, pet hair, and dust collect at the burner and the pilot, and a coated burner burns with a yellow flame instead of a blue one. Empire’s manual states that dust and lint inside the main burner produce a yellow flame, and it advises examining the burner at least twice per season because the burner may need cleaning for a proper flame.

Flame color gives homeowners a simple check between visits. SoCalGas lists a yellow, large, and unsteady burner flame among the signs of incomplete combustion on a gas appliance, so a flame that changes color deserves a call.

What Goes Wrong When a Wall Furnace Skips Maintenance?

Most wall furnace problems trace back to six conditions. Each one is easy to spot early and harder to fix once it grows.

Lint, Dust, and Pet Hair on the Burner and Pilot

Room air passes the burner on every cycle, and it brings lint along. Empire’s manual warns that fibers from carpeting and bedding add to the buildup and call for more frequent cleaning. The manual also notes that the pilot orifice and the burner may need cleaning because of spiders.

Furniture, Curtains, and Boxes Too Close to the Furnace

Clothing, curtains, laundry, boxes, and pet bedding stacked near a furnace can scorch, and they can block the air the furnace needs. CAL FIRE’s safe home heating guidance tells residents to keep anything that can burn at least three feet away from heating equipment. Empire’s manual also tells owners not to place anything around the furnace that blocks combustion and ventilation air.

The furnace itself needs minimum clearances to the wall, the floor, and the ceiling. Our post on wall furnace mounting and required safety clearances explains how the wall construction affects those distances.

A Weak Pilot, Thermocouple, or Thermopile

A standing pilot should burn blue and steady. Empire’s manual describes a correct pilot flame as blue and extending past the thermopile. Wall and floor furnaces often need a new thermocouple or a cleaned pilot assembly when the pilot keeps going out, and our guide to pilot light and ignition problems in gas furnaces lists the related causes.

Blocked or Damaged Venting

Exhaust needs a clear path outdoors. SoCalGas tells owners to make sure appliance venting stays intact and unblocked. Empire’s manual advises examining the venting system periodically and replacing damaged parts, and the model it covers carries a manual reset vent safety switch that shuts off gas to the main burner when the venting is improper or the flue is blocked.

A furnace that trips that switch needs a technician to find the cause before anyone resets it again. Homes that need a new vent sleeve before a wall furnace can go in get their own explanation in our post on vent sleeve reinforcement.

Gas Valves and Controls That Drift

Older gas valves and thermostat controls can drift out of calibration, and the furnace then cycles on and off at odd intervals or never reaches the temperature you set. Our post on gas valve calibration and irregular heating cycles in wall furnaces explains the pattern. Our thermostat services cover control problems that start at the thermostat itself.

Heat Exchanger and Casing Wear

The heat exchanger keeps combustion gases separate from room air. The U.S. Department of Energy’s furnace maintenance guidance explains that a leaking heat exchanger can mix combustion gases with house air, which is why a professional inspection matters. Soot streaks around the grille often show what the burner has been doing, and our post on what soot patterns around a wall furnace reveal shows how to read them.

Warning Signs That a Wall Furnace Needs Attention

Match what you see, hear, or smell to the table, and turn the furnace off for any sign that says so.

What You NoticeWhat It Can MeanNext Step
Yellow, large, or unsteady burner flameLint on the burner, a dirty orifice, or incomplete combustionTurn the furnace off and call for a burner cleaning and combustion check.
Soot or dark streaks around the grille or cabinetA burner or venting problem that leaves combustion uncleanTurn the furnace off and call for service.
Pilot keeps going outA weak thermocouple or thermopile, a dirty pilot orifice, a draft, or a gas valve problemCall for service instead of relighting the pilot again and again.
Furnace shuts off and needs a resetA tripped vent safety switch from blocked or improper ventingCall before anyone resets it again.
Cycles on and off, or never reaches the set temperatureThermostat or gas valve calibration, or restricted airflowSchedule an inspection of the controls and the gas valve.
Faint dusty smell on the first run of fallLint and dust burning off the burnerUsually normal. Ventilate the room, and call if it returns every cycle.
Plastic, hot wiring, or burning hair smell that staysAn electrical part running hot, or lint scorching on the burnerTurn the furnace off and call for service.
Rotten egg or sulfur smellNatural gas odorantLeave the home and call SoCalGas from outside. Do not touch switches or flames.
Carbon monoxide alarm sounds, or headaches and nausea that ease outdoorsPossible incomplete combustionGet everyone outside, call 911, and have the furnace inspected before anyone uses it again.

Utilities add a distinctive odor to natural gas so people can recognize it. SoCalGas’s natural gas leak guidance notes that a cold, allergies, or a reduced sense of smell can make a leak harder to notice, so act on the smell when you do notice it. Our post on a burning smell when you first turn on the heater separates harmless dust from smells that need a repair.

Carbon Monoxide Alarms Add a Second Layer

Carbon monoxide has no color or smell, so a clean-looking furnace never proves the air is clear. California law requires owners of dwelling units with a fossil fuel-burning heater or appliance to install carbon monoxide devices, and Health and Safety Code section 17926 sets deadlines of July 1, 2011 for existing single-family homes and January 1, 2013 for most other existing dwelling units. A gas wall furnace falls in that group.

The U.S. Consumer Product Safety Commission advises placing alarms on every level of the home and outside sleeping areas, and checking the batteries regularly. When anyone feels unwell and the symptoms ease outdoors, get everyone into fresh air and call 911.

DIY Checks vs Professional Service for a Wall Furnace

Some wall furnace care is safe for any homeowner. Anything that involves the casing, the gas supply, or the pilot belongs to a licensed technician. Online guides show how to remove the front panel and vacuum the burner area, and we recommend leaving that work to a technician because it involves the gas supply and the pilot.

Safe DIY Steps

  • Turn the thermostat down and let the furnace cool before you touch the grille.
  • Vacuum the grille, the louvers, and the floor and wall around the furnace with a brush attachment.
  • Clear at least three feet in front of the furnace, and keep the sides and top clear of stored items.
  • Watch the flame while the furnace runs, through the grille or viewing window if your model has one. Blue and steady is normal, and yellow is a reason to call.
  • Look at the outside vent terminal from the ground for nests, plants, and debris. Never climb onto the roof to check a vent.
  • Test every carbon monoxide alarm and smoke alarm, and replace weak batteries.
  • Run one full heating cycle on the first cold night while you stay home, and write down any smell, noise, or delay in lighting.

What Belongs to a Licensed Technician

  • Removing the casing and cleaning the burner, the pilot assembly, and the control compartment.
  • Testing the thermocouple or thermopile, the gas valve, and the gas connections.
  • Inspecting the heat exchanger, the flue passages, the vent connector, and the vent safety switch.
  • Measuring combustion and carbon monoxide at the vent with test instruments.
  • Repairs, part replacement, and any smell that does not fade or matches the plastic, soot, or gas rows in the warning table.

Empire’s manual tells owners to run the furnace only with its outer casing in place and leaves installation and repair to a qualified service person. Technicians also carry instruments that measure what the eye and nose cannot, including gas pressure, flame quality, and carbon monoxide at the vent.

The 12-Step Wall Furnace Maintenance Checklist

Steps 1 to 6 belong to you, and steps 7 to 12 belong to a technician. The schedule combines the yearly inspection that manuals and utilities advise with monthly habits that keep the burner clear between visits.

StepWhat to DoWhoWhen
1Clear three feet in front of the furnace, and keep the sides and top clear of stored items.YouEvery month of the heating season
2Vacuum the grille, the louvers, and the surrounding floor and wall with the furnace off and cool.YouEvery month of the heating season
3Watch the flame while the furnace runs. Blue and steady is normal, and yellow or unsteady is not.YouMonthly, and on the first cold night
4Look at the outside vent terminal from the ground for nests, plants, and debris.YouBefore winter
5Test every carbon monoxide alarm and smoke alarm, and replace weak batteries.YouBefore winter, then regularly
6Run one full heating cycle at home, and note any smell, noise, or delay in lighting.YouFirst cold night
7Remove the casing, and clean the burner, the pilot assembly, and the control compartment.TechnicianEvery year
8Test the thermocouple or thermopile, and confirm the pilot holds a steady blue flame.TechnicianEvery year
9Test the gas valve, check the gas connections for leaks, and confirm gas pressure.TechnicianEvery year
10Inspect the heat exchanger, the flue passages, the vent connector, and the vent safety switch where the model has one.TechnicianEvery year
11Confirm the clearances and the casing, and confirm the thermostat controls the flame.TechnicianEvery year
12Measure combustion and carbon monoxide at the vent, then explain the findings in plain language.TechnicianEvery year

Empire’s manual advises examining the burner at least twice per season, so many owners add a second flame check in midwinter. The monthly timing in steps 1 to 3 is a field rule of thumb, not a published standard. Use it as a guide, and trust your eyes and nose when something looks or smells wrong.

ENERGY STAR’s maintenance checklist names fall as the best time to have a heating professional check your equipment, because contractors fill their calendars once cold weather arrives. A visit before winter also leaves time to order a part when the technician finds a worn one. Our post on how regular heating maintenance prevents breakdowns explains the pattern, and our home heating safety inspection guide covers the whole house.

Maintenance, Repair, or Replacement: What Does Your Wall Furnace Need?

The right response depends on what the checklist finds. The table compares the main options.

OptionBest ForAdvantagesLimits
Homeowner cleaning and checksEvery month of the heating seasonSimple, needs only a vacuum, and catches changes earlyCannot clean the burner compartment or test the gas parts
Yearly heating maintenance visitEvery wall furnace, before winterCleans the burner and pilot, tests controls and venting, and finds worn parts earlyNeeds an appointment before the busy season
Wall furnace repairPilot outages, a yellow flame, irregular cycles, or sootTargeted fix for the thermocouple, thermopile, gas valve, thermostat, or burnerOlder models may need hard-to-find parts
Wall furnace installationA cracked heat exchanger, repeat repairs, or a rusted or damaged casingRestores reliable heat with current controlsA larger project, so we review the options with you first
Gas furnace service and heating installationHomes that want ducted heat instead of a wall unitHeats several rooms from one systemNeeds ductwork or a suitable location, and a larger project

A furnace near the end of its service life changes the conversation from repair to replacement. We explain both paths honestly, including when a repair makes sense. Our guide to telling how old your furnace is shows where to find the date on your unit, and our overview of the advantages and disadvantages of wall heaters helps owners weigh keeping a wall unit against switching systems. Homes with a heat pump can also rely on our heat pump services, and a furnace that fails during a cold night falls under our heating system repair service.

Wall Furnace Care in Downey and Nearby Cities: Local Conditions That Matter

Southern California’s mild climate shapes how wall furnaces age. NOAA’s 1991 to 2020 climate normals for Long Beach put the average overnight low at 51.6°F in November and 46.6°F in December, the months when heaters in our area begin to run regularly. A furnace can sit idle for most of the year, collect dust and lint, and then run for hours on the first cold night. That pattern explains why a pre-winter check matters more here than the calendar suggests.

The City of Downey’s homeowner alert on sewer laterals notes that builders constructed most of Downey’s homes in the 1940s through 1960s. Wall furnaces still heat older homes, duplexes, and rentals across our service area, and they collect lint and pet hair faster than a closed furnace cabinet. Floor furnaces share the same needs plus a few more, because they sit below the living space. Our post on what long-term floor furnace use reveals about subfloor and joist health covers what a technician looks for under the house, and our post on floor furnace output after flooring renovations explains why new flooring and rugs change how a floor furnace behaves. Our floor furnace services list the repair and maintenance options.

Renters make up a large share of local households. U.S. Census Quick Facts for Downey reports that owners occupy 51.1 percent of occupied homes (2020 to 2024 estimates), so renters occupy about 49 percent. SoCalGas states that gas appliance maintenance belongs to the homeowner, which makes the landlord the first call for most tenants.

Renters should report a heater problem to the landlord or property manager in writing and keep a copy. California Civil Code section 1941.1 lists heating facilities that stay in good working order among the conditions of a habitable rental. This is general information, not legal advice.

For a gas smell, call your gas utility from outside the home. SoCalGas serves most of our service area, and some nearby cities run their own gas utility. Our heating services cover residential and commercial heating throughout the area, including Downey, Bellflower, Paramount, Whittier, Santa Fe Springs, and Pico Rivera.

Frequently Asked Questions: Wall Furnace Maintenance

How often should I service a wall furnace?

Have a licensed technician inspect and clean a wall furnace once a year, before the first cold nights. Empire’s manual for one gravity wall furnace model tells owners to have a qualified service person inspect the appliance at least annually, and SoCalGas advises checking gas appliances every year. Between visits, vacuum the grille and check the flame once a month during the heating season.

What does a wall furnace maintenance visit include?

A visit cleans the burner and pilot assembly, tests the thermocouple or thermopile and the gas valve, and checks the gas connections. The technician also inspects the heat exchanger, the vent, and the vent safety switch on models that have one, confirms clearances, and confirms the thermostat controls the flame. Instruments measure combustion and carbon monoxide at the vent, and you hear the findings before any repair begins.

Can I clean my wall heater myself?

You can vacuum the grille, wipe the outside, and clear the space around the furnace while it is off and cool. Cleaning inside the cabinet is different, because it involves the gas supply, the pilot, and the casing. Empire’s manual tells owners to run the furnace only with its outer casing in place and leaves repair to a qualified service person, so we recommend a technician for the burner and pilot.

What color should a wall furnace flame be?

The flame should burn blue and steady. Empire’s manual describes a correct pilot flame as blue and extending past the thermopile, and a correct main burner flame as a short blue inner flame with a larger light blue outer flame. A yellow, large, or unsteady flame needs a technician, and SoCalGas lists that flame among the signs of incomplete combustion.

Why is the flame on my wall heater yellow?

Lint and dust on the burner are a common reason. Empire’s manual states that dust and lint inside the main burner produce a yellow flame, and carpet or bedding fibers add to the buildup. A yellow flame can also point to incomplete combustion or a venting problem, so turn the furnace off and have a licensed technician clean and test it before you use it again.

How far should furniture and curtains sit from a wall furnace?

CAL FIRE tells residents to keep anything that can burn at least three feet from heating equipment. Manufacturers also list minimum clearances for the furnace itself, and those distances differ by model, so check the manual for yours. Empire’s manual tells owners not to place anything around the furnace that blocks the flow of combustion and ventilation air.

Why does my wall furnace pilot light keep going out?

Common causes include a weak thermocouple or thermopile, a dirty pilot orifice, a draft, or a gas valve problem. A blocked vent can also shut off the gas on models with a vent safety switch. Relighting the pilot again and again does not fix the cause. Our guide to pilot light and ignition problems explains each one, and a technician can test the parts and the venting.

Is it normal for a wall heater to smell the first time I run it in the fall?

A faint dusty or toasty smell during the first hour or two is common, because dust and lint settle on the burner while the furnace sits idle. A smell that stays strong, returns every cycle, or smells like plastic, soot, or rotten eggs needs attention. Leave the home for a rotten egg smell and call SoCalGas from outside. Our burning smell guide shows how to tell the difference.

Do wall furnaces need carbon monoxide alarms?

California law requires owners of dwelling units with a fossil fuel burning heater or appliance to install carbon monoxide devices, and a gas wall furnace falls in that group. The U.S. Consumer Product Safety Commission advises alarms on every level of the home and outside sleeping areas. Alarms add protection but do not replace yearly maintenance, because they only react after carbon monoxide builds up.

Are wall furnaces safe to use?

A wall furnace with correct installation, clear venting, three feet of clearance, and a yearly inspection is a long-standing way to heat Southern California homes. Safe use depends on the habits in this checklist: a clean burner, a blue flame, a clear vent, and working carbon monoxide alarms. Our post on the advantages and disadvantages of wall heaters covers the trade-offs in more detail.

How do I know if my wall furnace vent is blocked?

Warning signs include a furnace that shuts off and needs a reset, soot or staining around the grille, an unusual pungent odor, or a yellow flame. Models with a vent safety switch shut off gas to the main burner when the flue is blocked or the venting is improper. Look at the outside terminal from the ground, and call a technician to inspect the flue.

Does my landlord have to maintain the wall heater in my rental?

California Civil Code section 1941.1 lists heating facilities that met the law at installation and stay in good working order among the conditions of a habitable rental. Report a heater problem to your landlord or property manager in writing and keep a copy. This is general information, not legal advice, and an attorney or tenant resource can answer questions about your lease.

When should I replace a wall furnace instead of repairing it?

Replacement deserves a look when a technician finds a cracked heat exchanger, rust or damage to the casing, or repeat failures of the pilot, gas valve, or controls. Parts for older models can also be hard to find. A technician explains both paths before work begins. Our guide to telling how old your furnace is shows where to find the date on the data plate.

How does floor furnace maintenance differ from wall furnace maintenance?

The checklist is similar, with extra steps because a floor furnace sits below the living space. A technician checks the grille, the burner and pilot, the area under the house, and the subfloor around the unit for moisture, debris, rust, and pest activity. Keep rugs and furniture off the grille, and call for service when the flame looks weak or yellow.

Does Downey Plumbing Heating & Air Conditioning maintain wall furnaces and floor furnaces?

Yes. Our licensed technicians (CA License #731172) clean, test, and inspect gas wall furnaces and floor furnaces across Downey and nearby cities, and emergency heating repair is available 24 hours a day, 7 days a week. We explain our findings before any repair begins. Schedule a visit before the first cold nights so the technician has time to order any worn part.

When to Call Downey Plumbing Heating & Air Conditioning About Your Wall Furnace

Call us once a year for the technician steps in the checklist, and call sooner when you see a yellow flame, soot, a pilot that keeps going out, or a smell that does not fade. Our licensed technicians maintain and repair gas wall furnaces, floor furnaces, central furnaces, and heat pumps, and emergency heating repair is available 24 hours a day, 7 days a week.

What We OfferWhat It Means for You
CA License #731172 (CSLB Verified)Check our license status on the CSLB license lookup before you hire any contractor
BBB A+ AccreditationA third-party rating from the Better Business Bureau, available to review on our BBB profile
850+ Yelp Reviews, 4.8 StarsReal customer feedback you can read in full on Yelp
Serving Southern California Since 193090+ years of plumbing and HVAC experience in the region
Fully Licensed and InsuredGeneral liability and workers’ compensation coverage protect your property and your household
24/7 Emergency ServiceLicensed technicians on call at any hour, including weekends and holidays
Residential and CommercialOne company for homes, rentals, restaurants, offices, and retail properties
Plumbing and HVAC Under One RoofOne call covers water heaters, drains, leaks, air conditioning, and heating
Wall and Floor Furnace TechniciansWe maintain gas wall furnaces and floor furnaces, plus central furnaces and heat pumps
Written Service RecordEach visit documents the readings and findings, so you keep a service history

Review our CSLB license record, our BBB A+ profile, and our 850+ Yelp reviews at any time to confirm what Downey customers read here.

Schedule Wall Furnace Maintenance in Downey Before Winter

Downey Plumbing Heating & Air Conditioning is licensed (CA License #731172), fully insured, and BBB A+ rated, and we answer heating calls 24/7. Call 562-646-1221 or contact us online to have a licensed technician clean, test, and inspect your wall furnace before the cold settles in.

The words out about Downey Plumbing!

“Downey Plumbing is our go-to for all our plumbing needs. We discovered them after another plumber left us stranded. We now use them exclusively and you will too! It is easy to get an appointment, their technicians are professional, friendly and explain the issues in an understandable way. Their prices are great and they don’t upsell or pressure you into anything. Do yourself a favor and call Downey first!!” - Michelle Deziel
“Our water heater went out on the weekend. Downey plumbing was so responsive and the bid came in very reasonable. The tech came out same day and replaced our water heater with very little down time. The job was exactly as quoted. I really appreciated the professionalism of the tech. Thank you Downey plumbing for getting us back up and running, because cold showers are no fun!” - Christine Rankin

ZIP CODES WE SERVE

  • 90001
  • 90002
  • 90003
  • 90007
  • 90011
  • 90022
  • 90023
  • 90032
  • 90037
  • 90040
  • 90040
  • 90043
  • 90044
  • 90047
  • 90051
  • 90052
  • 90058
  • 90059
  • 90061
  • 90062
  • 90063
  • 90082
  • 90089
  • 90091
  • 90096
  • 90201
  • 90201
  • 90201
  • 90202
  • 90220
  • 90221
  • 90222
  • 90223
  • 90224
  • 90239
  • 90240
  • 90241
  • 90242
  • 90245
  • 90247
  • 90248
  • 90249
  • 90250
  • 90251
  • 90254
  • 90255
  • 90260
  • 90261
  • 90262
  • 90266
  • 90267
  • 90270
  • 90274
  • 90275
  • 90277
  • 90278
  • 90280
  • 90303
  • 90304
  • 90305
  • 90310
  • 90501
  • 90502
  • 90503
  • 90504
  • 90505
  • 90506
  • 90507
  • 90508
  • 90509
  • 90510
  • 90601
  • 90602
  • 90603
  • 90604
  • 90605
  • 90606
  • 90607
  • 90608
  • 90609
  • 90610
  • 90620
  • 90621
  • 90622
  • 90623
  • 90624
  • 90630
  • 90631
  • 90632
  • 90633
  • 90637
  • 90638
  • 90639
  • 90640
  • 90650
  • 90651
  • 90652
  • 90660
  • 90661
  • 90662
  • 90670
  • 90671
  • 90680
  • 90701
  • 90702
  • 90703
  • 90706
  • 90707
  • 90710
  • 90711
  • 90712
  • 90713
  • 90714
  • 90715
  • 90716
  • 90717
  • 90720
  • 90721
  • 90723
  • 90731
  • 90732
  • 90733
  • 90734
  • 90740
  • 90742
  • 90743
  • 90744
  • 90745
  • 90746
  • 90747
  • 90748
  • 90749
  • 90755
  • 90801
  • 90802
  • 90803
  • 90804
  • 90805
  • 90806
  • 90807
  • 90808
  • 90809
  • 90810
  • 90813
  • 90814
  • 90815
  • 90822
  • 90831
  • 90832
  • 90833
  • 90834
  • 90835
  • 90840
  • 90842
  • 90844
  • 90846
  • 90847
  • 90848
  • 90853
  • 90895
  • 90899
  • 91706
  • 91733
  • 91754
  • 91755
  • 91756
  • 91770
  • 91771
  • 91772
  • 91801
  • 91802
  • 91803
  • 91804
  • 91896
  • 91899
  • 92683
  • 92684
  • 92685
  • 92701
  • 92702
  • 92703
  • 92704
  • 92705
  • 92706
  • 92707
  • 92711
  • 92712
  • 92725
  • 92735
  • 92780
  • 92781
  • 92782
  • 92799
  • 92801
  • 92802
  • 92803
  • 92804
  • 92805
  • 92806
  • 92807
  • 92808
  • 92809
  • 92812
  • 92814
  • 92815
  • 92816
  • 92817
  • 92821
  • 92822
  • 92823
  • 92825
  • 92831
  • 92832
  • 92833
  • 92834
  • 92835
  • 92836
  • 92837
  • 92838
  • 92840
  • 92841
  • 92842
  • 92843
  • 92844
  • 92845
  • 92846
  • 92850
  • 92856
  • 92857
  • 92859
  • 92861
  • 92863
  • 92864
  • 92865
  • 92866
  • 92867
  • 92868
  • 92869
  • 92870
  • 92871
  • 92899

Areas we serve

562-502-8911